Audi TT Forum banner

New Gator - How to Fit

824 views 18 replies 9 participants last post by  zakkiaz  
#1 ·
Hi All,

Well it didn't take long after the weekend meet (Ian are you going to post a few pics) I have got a demin blue leather gator to replace the standard rubber one, small mod I know by its a start :roll:

To save any pain, does anyone have a 'How to fit' guide :oops: Or anything I need to be carefull of?

T ROB T
 
#2 ·
It's about as simple a mod as you can get mate ;-) depending upon the actual gaiter you may not even have to remove the gearknob, but there are a lot of different styles. I have recently seen pics where people have left the rubber gaiter in place so that it keeps the leather offering up and that seems to look a lot better to me and obviously easy for you :)

Take it out to the car offer it up and I reckon within 10 mins tops you will be sporting a new leather gaiter ;-)

Charlie
 
#7 ·
Well I have done it :p Hardest part was lining up the holes.......... BUT......

Colour match!! :eek: [smiley=bigcry.gif]



Will this tone down or should I be going back to suppiler, I know the car is 8 years old and you won't get a perfect colour match but I did order a denim blue :oops: :eek: and the flash is on the camera

Over to the experts.......

Neil, no not got the cable yet, gently does it :lol:
 
#9 ·
Looking good Rob.

Did you leave the rubber gaitor under the leather one as mentioned by Charlie?

I looks better as the leather does not disappear down the hole!
 
#15 ·
The match is a mile out [smiley=bigcry.gif] He did say he had a darker colour, but not tacking the risk, plus the knee pads are black, so going back to black. :p

Gator was from e-bay, very quick service and the after sales has been good, no quibble about changing it over. Was charged extra for a blue one :x

T ROB T
 
#17 ·
Hi Rob,

Did you by any chance get it from Top Gaiters on ebay?

I have black leather gear gaiter with red stitching which now sits perfectly.

The first one I recieved had too many holes and I had to bunch 2 holes together
to fit it and then it wasn't flush and looked wrong....However I explained the problem
and sent them a diagram of exactly what I wanted and they sent me another free of charge
and it fitted spot on.

Message me your email addy and I will do my best to help you.

Cheers
 
#19 ·
hi did you manage to get knob off ok? i need a new gator as tried to get knob offand riped it!! [smiley=bigcry.gif] still can't unscrew knob goes on for ever!
Wendy
T ROB T said:
I know it seems dumb, but :lol: :oops: , Knob just unscrews and the just remove the surround and fit over the top :oops: